Outline Dimensions
External dimensions Pusher plate dimension
| Length | 7700 mm |
| Wide | 2050 mm |
| Height | 2225 mm |
| Working width | 3055 mm |
| Lateral shift | +/-500 mm |
| Push plate height | 500 mm |
| Wording depth max | 310 mm |
| Adjust the Angle | 41°-62° |
| Rotation Angle | +/- 45° |
Turning radius
| Inner side | 2100 mm |
| Outer side | 5450 mm |
Diesel engine– German Deutz TCD4.1
| Emissions | European Union Stage III |
| Power | 115kW @2300rpm |
| Exhaust system | Oxidation + Catalysis |
| Generator/starting motor | 28V 100A,24V 4kW |
| Dry air filter | |
| Engine monitoring and operational data diagnostic display | |
| Diesel primary filter with oil-water separator | Diesel fine filter |
Full load weight
| Full gross weight | 11,000kg |
| Front axle load | 5,500kg |
| Rear axle load | 6,000kg |
Working conditions and limitations
| Environmental stability | The ambient temperature ranges from-5℃ to +40℃ |
| Standard operating altitude | 1500m在30℃ |
Fuel system Hydraulic system
| Pilot control bucket and boom action (hydraulic control). Oil is supplied from the plunger pump to the main valve of the bucket hydraulic system. | |
| Hydraulic tank volume | 110L |
| Level gauge | Observe the oil level |
| Temperature sensor | Monitor oil temperature |
| Main valve | Manual control |
| Fuel capacity: | 170 L |
| Electric level indicator |
Power system
| Hydrostatic drive | |
| Load feedback variable pump | |
| All-wheel drive | |
| Speed | 0-20 Km/h |
| Traction | 70 kN |
Axle Steering system
| Hydraulic hinge steering system, driven by two double-acting hydraulic cylinders, fully hydraulic steering wheel control |
Manufacturer Dana
| Front axle | Type 212
Differential Open |
| Rear axle | Type 112
Differential 100% |
Service brake: double circuit hydraulic Electrical system
| Working Voltage | 24V |
| Storage Battery | 2×12V,110Ah |
| The main power switch can be locked | |
| Emergency stop button, 1 in the cab, 1 outside | |
| The dual speaker configuration is used for start and reverse alarm | |
| 4 front lights, 18W LED 4 rear lights, 18W LED |
|
| CAN bus control, electronic monitoring system, with 7″ color display, fault self-diagnosis | |
| Rotating beacon | |
brake system, wet multi-disc brake
Parking brake: spring brake, hydraulic
release.
Hand pump decompression
release brake system
Tire
| Tire model | 12.00×20 |
Cab
| Front and rear windshields |
| The front windshield is equipped with wipers and cleaning devices |
| All switches and controls are within the operator’s reach |
| The driver’s seat is secured with a seat belt |
Document
Standard manual
| User Manuals | |
| Operating instruction | English |
| Spare Parts Manual | English |
QINGDAO ZONGDA MACHINERY CO., LTD is a professional manufacture focusing on research and development, production, sale and service of underground mining machinery, a solution supplier and a mining project contractor in China with strong comprehensive strength and rich experience in mining industry.
We have more than 30 professional and experienced mining experts and engineers and 200 staff for R&D, Production, QC, After Sales Technical Support and etc.
We have fulfilled our commitment to turn knowledge into value by delivering a comprehensive range of integrated equipment and services that cost-effectively transform ore bodies into high grade mineral products for customers.
A: We produce underground mining vehicles and spare parts for metal mines.
A: Yes.
A: Our quotations usually under CIF terms include Freight and Insurance but no Tariffs.
A: 1 or 2 months usually. Yes and there are stock available sometime.
A: Our forwarder partner will arrange the proper transportation solution and can arrange the door-to-door service as well.
A: We have special and detailed warranty policy.
A: Yes.
A: TT Bank Transfer is preferred.
A: 1 to 2 months usually.
A: Yes, but only LC at sight.
A: We have both local and online technical after-salves service provided.
Depending on strong technical capability and rich experience, ZONGDA provides the EPC service to the domestic and international clients and has abundant EPC project experience in China.