Products

ZDTC89 Remote-control Underground Drilling Rig

ZDTC89 Remote-control Underground Drilling Rigs

ZDTC89 Remote-control Underground Drilling Rig

ZDTC89 Remote-control Underground Drilling Rigs

Product Details

 

Technical DATA

ZDTC89 Remote-control Underground

Drilling Rig

 

ZDTC89 Remote-control Underground
Drilling Rig ZDTC89 Remote-control Underground
Drilling Rig

 

 

 

 

ZDTC89 Remote-control Underground Drilling Rigs

 

ZDTC89 remote-control underground drilling rigs are used for production drilling in underground mining applications. The rig is a long-hole drilling rig for small to medium – sized drifts in 76mm to 127mm hole range. It provides the max. coverage area up to 4.6 meters x 5 meters with feed dump of +20° forward and -80° backward. It is also capable of 360° ring drilling parallel holes upwards, downwards and in the side walls. It is equipped with a rod carousel with 17 rods for drilling length up to 32 meters. With a automatic rod handling system (RHS), PLC control system, remote-control system, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent-winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. With 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.

 

Main Advantages

 

  • ZDG550 rock drill with impact power of 24Kw
  • High drilling speed and low failure rate, especially design for hard rocks
  • Made by our own company means low costs and faster delivery on spare parts, save the time and expenses of the miners
  • Self-lubrication material is applied in the rock drills – the maintenance period is longer than similar products
  • Pressurized housing and mating surfaces to reduce internal contamination of the rock drill and the system – the life circle is longer than similar products

 

 

Drilling unit- Accurate and intelligent

 

  • Automatic rod handling system (RHS) with 17 rods for drilling length up to 32 meters
  • Feedwith hydraulic two-stage cylinder
  • Front and rear mounted stringers for accuracypositioning
  • Drillsteelsupport for guidance for support andposition

 

ZDTC89 Remote-control Underground
Drilling Rig

Positioning unit – high mobility

 

  • Feed with tilt, rotation, pendulum arm and slidetable
  • Accurate and smooth movements of therig
  • Mine-adapted, sturdycomponents

 

Control system – maximum safety for the miners

 

  • PLC control system
  • Anti-jamming system forthe
  • Remotecontrol system for maximum safety during positioning and drilling

 

 

Carrier – Dana Axel and Deutz Engine

 

  • Articulatedsteering and four-­‐wheel drive
    • Sturdy, articulated carrier with four-wheel drive – Dana Axle fromGermany

 

  • Powered by a strong and 5-cylinder Deutz diesel engine-EPA III/COM III approved and qualityguaranteed
  • Four jacks for stable set

 

 

General – Best quality guaranteed

 

  • Firm steel protective FOPS proofed roof for the maximumsafety
  • Automatic hydraulic -driven cable reel for customerrequirements
  • Electrically driven compressor
  • Michelin tyres – the most famous tyres brand fromFrance
  • Trolley-­‐mountedoperator panel
  • Working lights ontripods

 

 

 

Specifications

 

 

Rock Drill ZDG550
Shank adapter R32 T38 T45 T51
Hole diameter 51mm­102mm
Feed impact force ≤425 J
Impact power 24KW
Impact rate 5o­68HZ
Hydraulic pressure 200 bar
Rotation system Separate rotation
Rotation speed 0­300 rpm
Rotation torque, max 980 N.m
Lub air consump at 6 bar 1.5 L/s
Water consumption, max 2 L/s
Weight 180 Kg
Sound Level <110 dB(A)

 

Feed  
Adapt to drilling width 3300­3900mm
Adapt to drilling height 4000­5000mm
Drill rod length 1500­1800mm

 

Drilling unit  
Rod Handling system, RHS 17 17+1 rods
Adaptable to 4′,5’and 6’rods Yes
Adaptable to R32,T38,T45 Speed rods Yes
Adaptable to TDS 56 and TDS 64 drill tubes Yes
Mechanized drilling up to 30 m Yes

 

Positioning system  
Feed extension (with 5’and 6′ drill steel) 1200mm
Rotary Acurator BHR 30 for 360 ring drilling  
Sliding table gives 1.5m feed parallel positioning  
Pendulum arm gives 1.5m feed parallel positioning in the sidewalls. Add further 1.5 feed parallel positioning upwards/downwards  
Stinger backward on feed 1150mm
Stinger forward on feed 1150mm
Feed dump, drilling +20° forward and 80° backward
Rig alignment laser Yes

 

Air System  
Compressor Chinese brand
Air pressure gauge Yes
Capacity. Max at 7 bar 300L/Min
Lubricated air for the rock drill Yes
Control system  
Remote­­‐control automatic drilling 50m
Anti­jamming system Yes

 

Power pack  
Hydraulic pump for percussion, positioning, feed Yes
Hydraulic pump for rotation Yes
Pumps unloaded at start Yes
Low oil level indicator and shut down Yes
Oil temperature gauge on oil tank, electronically

supervised

Yes
Electric oil filling pump Yes
Filtration, absolute 16μm
Oil filter indicator Yes
Water cooled oil in stainless steel Yes
Mineral hydraulic oil  

 

 

Electrical system  
Electric motor ABB YX3 250M­4(B5)
Total installed power 55kW
Staring method star/delta (380­690V)
  direct(1000V)
Thermal overload protection for electric

 

motors

 
Percussion hour meters Yes
Digital volt/amperage meter in electric cabinet Yes
Phase sequence indicator Yes
Earth fault indicator Yes
Battery charger Yes
Transformer 5kVA
Working lights on tripods 2x200W, 24V
Limit switch for cable reel Yes

 

 

Water System  
Hydraulic driven water pump ABB 7.5KW
Water booster pump max. capacity at 7 bar 115 l/min
Water pressure gauge Yes
Water flow guard Yes
Min. Water inlet pressure, bar 4 bar

 

 

Carrier  
Engine Deutz F5L 912W, Diesel
Power rating at 2500rpm 55kW (75hp)
Torque at 1550rpm 258Nm
Fixed seat for tramming with safety belt Yes
Articulated Steering  

± 40 °steering angle

Spirit levels Yes
Horn, beacon and reverse alarm Yes
Four­­‐wheel drive Yes
Hydrostatic power steering system Yes
Hydrostatic transmission Clark
Front axle Dana 112
Rear axle  

Dana 112,  ±10° oscillation

Tyres Michelin XZR

 

8.25xR15

Clearance outside axles  

15°

Hydraulic jacks, front 2 extendable
Hydraulic jacks, rear 2
Service brakes 2 separate circuits
Emergency and parking brakes SHAR
Fuel tank, volume 60L
Electric system 24V
Batteries 2 x 12V, 70Ah
Tramming light 8 x 70W
Working light 2x200W, 24V
Central lubrication system  
Fire extinguisher Yes
Gradeability at max.load on drive wheels 1:4
Silencer Yes
Catalyzer Yes
Tramming speed on flat ground >10 km/h
Tramming speed on incline 1:8 > 4km/h
Rig alignment laser Yes

 

MeasurementsZDTC89 Remote-control Underground
Drilling Rig ZDTC89 Remote-control Underground
Drilling Rig ZDTC89 Remote-control Underground
Drilling Rig

 

 

 

Dimensions Length Width Height
Tramming 6880mm 2380mm 2810mm
Drilling 6880mm 3240mm 3670mm
Ground clearance 260mm    
Gross weight 12500kG    

 

 

 

Turning radius(depending on surface)  
Outer 5100mm
Inner 2700mm

 

 

Recommended cablesize

 

and length

   
Voltage Dimension Length
380V 4×30mm² 80m
660V  

4x25mm²

100m
1140V  

3×25+3x6mm²

145m

Protection yellow/green

Recommendations are given for surrounding temperature of 40°C

 

 

 

 

 

 

 

 

 

Related Products
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Technical drawing And Dimensions
Company Profile

QINGDAO ZONGDA MACHINERY CO., LTD is a professional manufacture focusing on research and development, production, sale and service of underground mining machinery, a solution supplier and a mining project contractor in China with strong comprehensive strength and rich experience in mining industry.
We have more than 30 professional and experienced mining experts and engineers and 200 staff for R&D, Production, QC, After Sales Technical Support and etc.
We have fulfilled our commitment to turn knowledge into value by delivering a comprehensive range of integrated equipment and services that cost-effectively transform ore bodies into high grade mineral products for customers.

Packaging & Shipping
FAQ
1. What mechanical products do you mainly produce? Are there any industry-specific orientations?  

A: We produce underground mining vehicles and spare parts for metal mines.

A: Yes.

A: Our quotations usually under CIF terms include Freight and Insurance but no Tariffs. 

A: 1 or 2 months usually. Yes and there are stock available sometime.

A: Our forwarder partner will arrange the proper transportation solution and can arrange the door-to-door service as well. 

A: We have special and detailed warranty policy.

A: Yes.

A: TT Bank Transfer is preferred.

A: 1 to 2 months usually. 

A: Yes, but only LC at sight.

A: We have both local and online technical after-salves service provided. 

Contact Us

Get In Touch

Depending on strong technical capability and rich experience, ZONGDA provides the EPC service to the domestic and international clients and has abundant EPC project experience in China.

Get a quote

Request a quote