Технички подаци
ZDTC89 Remote-control Underground
Drilling Rig

ZDTC89 remote-control underground drilling rigs are used for production drilling in underground mining applications. The rig is a long-hole drilling rig for small to medium – sized drifts in 76mm to 127mm hole range. It provides the max. coverage area up to 4.6 meters x 5 meters with feed dump of +20° forward and -80° backward. It is also capable of 360° ring drilling parallel holes upwards, downwards and in the side walls. It is equipped with a rod carousel with 17 rods for drilling length up to 32 meters. With a automatic rod handling system (RHS), PLC control system, remote-control system, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent-winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. With 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
| Rock Drill | ZDG550 |
| Shank adapter | R32 T38 T45 T51 |
| Hole diameter | 51mm102mm |
| Feed impact force | ≤425 J |
| Impact power | 24KW |
| Impact rate | 5o68HZ |
| Hydraulic pressure | 200 bar |
| Rotation system | Separate rotation |
| Rotation speed | 0300 rpm |
| Rotation torque, max | 980 N.m |
| Lub air consump at 6 bar | 1.5 L/s |
| Water consumption, max | 2 L/s |
| Тежина | 180 Kg |
| Sound Level | <110 dB(A) |
| Feed | |
| Adapt to drilling width | 33003900mm |
| Adapt to drilling height | 40005000mm |
| Drill rod length | 15001800mm |
| Drilling unit | |
| Rod Handling system, RHS 17 | 17+1 rods |
| Adaptable to 4′,5’and 6’rods | Да |
| Adaptable to R32,T38,T45 Speed rods | Да |
| Adaptable to TDS 56 and TDS 64 drill tubes | Да |
| Mechanized drilling up to 30 m | Да |
| Positioning system | |
| Feed extension (with 5’and 6′ drill steel) | 1200 мм |
| Rotary Acurator BHR 30 for 360 ring drilling | |
| Sliding table gives 1.5m feed parallel positioning | |
| Pendulum arm gives 1.5m feed parallel positioning in the sidewalls. Add further 1.5 feed parallel positioning upwards/downwards | |
| Stinger backward on feed | 1150mm |
| Stinger forward on feed | 1150mm |
| Feed dump, drilling | +20° forward and 80° backward |
| Rig alignment laser | Да |
| Air System | ||
| Compressor | Chinese brand | |
| Air pressure gauge | Да | |
| Capacity. Max at 7 bar | 300L/Min | |
| Lubricated air for the rock drill | Да | |
| Контролни систем | ||
| Remote‐control automatic drilling | 50m | |
| Antijamming system | Да | |
| Power pack | |
| Hydraulic pump for percussion, positioning, feed | Да |
| Hydraulic pump for rotation | Да |
| Pumps unloaded at start | Да |
| Low oil level indicator and shut down | Да |
| Oil temperature gauge on oil tank, electronically
supervised |
Да |
| Electric oil filling pump | Да |
| Filtration, absolute | 16μm |
| Oil filter indicator | Да |
| Water cooled oil in stainless steel | Да |
| Mineral hydraulic oil |
| Електрични систем | |
| Electric motor | ABB YX3 250M4(B5) |
| Total installed power | 55kW |
| Staring method | star/delta (380690V) |
| direct(1000V) | |
| Thermal overload protection for electric
motors |
|
| Percussion hour meters | Да |
| Digital volt/amperage meter in electric cabinet | Да |
| Phase sequence indicator | Да |
| Earth fault indicator | Да |
| Battery charger | Да |
| Transformer | 5kVA |
| Working lights on tripods | 2x200W, 24V |
| Limit switch for cable reel | Да |
| Water System | |
| Hydraulic driven water pump | ABB 7.5KW |
| Water booster pump max. capacity at 7 bar | 115 l/min |
| Water pressure gauge | Да |
| Water flow guard | Да |
| Min. Water inlet pressure, bar | 4 bar |
| Carrier | |
| Мотор | Deutz F5L 912W, Diesel |
| Power rating at 2500rpm | 55kW (75hp) |
| Torque at 1550rpm | 258Nm |
| Fixed seat for tramming with safety belt | Да |
| Articulated Steering |
± 40 °steering angle |
| Spirit levels | Да |
| Horn, beacon and reverse alarm | Да |
| Four‐wheel drive | Да |
| Hydrostatic power steering system | Да |
| Hydrostatic transmission | Clark |
| Front axle | Dana 112 |
| Rear axle |
Dana 112, ±10° oscillation |
| Tyres | Michelin XZR
8.25xR15 |
| Clearance outside axles |
15° |
| Hydraulic jacks, front | 2 extendable |
| Hydraulic jacks, rear | 2 |
| Service brakes | 2 separate circuits |
| Emergency and parking brakes | SHAR |
| Fuel tank, volume | 60L |
| Electric system | 24V |
| Batteries | 2 x 12V, 70Ah |
| Tramming light | 8 x 70W |
| Working light | 2x200W, 24V |
| Central lubrication system | |
| Fire extinguisher | Да |
| Gradeability at max.load on drive wheels | 1:4 |
| Silencer | Да |
| Catalyzer | Да |
| Tramming speed on flat ground | >10 km/h |
| Tramming speed on incline 1:8 | > 4km/h |
| Rig alignment laser | Да |
Measurements

| Димензије | Дужина | Ширина | Height |
| Tramming | 6880mm | 2380mm | 2810mm |
| Drilling | 6880mm | 3240mm | 3670mm |
| Откривање тла | 260mm | ||
| Gross weight | 12500kG |
| Turning radius(depending on surface) | |
| Споља | 5100mm |
| Inner | 2700mm |
| Recommended cablesize
and length |
||
| Voltage | Димензија | Дужина |
| 380V | 4×30mm² | 80m |
| 660V |
4x25mm² |
100m |
| 1140V |
3×25+3x6mm² |
145m |
Protection yellow/green
Recommendations are given for surrounding temperature of 40°C
КИНГДАО ЗОНГДА МАЦХИНЕРИ ЦО., ЛТД је професионална производња која се фокусира на истраживање и развој, производњу, продају и сервис подземних рударских машина, добављача решења и извођача рударских пројеката у Кини са јаком свеобухватном снагом и богатим искуством у рударској индустрији .
Имамо више од 30 професионалних и искусних рударских стручњака и инжењера и 200 особља за Рамп; Д, производња, КЦ, техничка подршка након продаје итд.
Испунили смо своју обавезу да знање претворимо у вредност пружајући свеобухватан спектар интегрисане опреме и услуга који економично трансформишу рудна тела у висококвалитетне минералне производе за купце.
О: Производимо подземна рударска возила и резервне делове за руднике метала.
О: Да.
О: Наши котати обично под ЦИФ условима укључују терет и осигурање, али без тарифа.
О: Обично 1 или 2 месеца. Да и понекад су доступне залихе.
О: Наш партнер шпедитера ће организовати одговарајуће решење за превоз и може организовати услугу од врата до врата.
О: Имамо посебну и детаљну политику гаранције.
О: Да.
О: Преферира се трансфер банке ТТ.
О: Обично 1 до 2 месеца.
О: Да, али само ЛЦ на видику.
О: Пружени смо и локални и мрежни технички сервис након салве.
У зависности од снажних техничких способности и богатог искуства, ЗОНГДА пружа ЕПЦ услугу домаћим и међународним клијентима и има обилно искуство у ЕПЦ пројектима у Кини.