



ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 remote-control underground long-hole drilling rig is used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling 1.5meters parallel holes, upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent- winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 remote-control underground long-hole drilling rig is used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling 1.5meters parallel holes, upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent- winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
ZDTC64 Remote–control
Underground Long–hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 remote-control underground long-hole drilling rig is used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling 1.5meters parallel holes, upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent- winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
Main Advantages of Rock drill
ZDG550 rock drill with impact power of 24Kw and impact frequency up to 75Hz maximum
High drilling speed and low failure rate esp. for hard rock condition
Made by our own factory means low costs and faster delivery on
spare parts, saving the time and expenses of the miners
Self-lubrication material is applied in the rock drills -the maintenance period is longer than similar products
Pressurized housing and mating surfaces to reduce internal contamination of the rock drill and the system – the life circle is longer than similar products
Positioning unit – high mobility
Feed with tilt, rotation, pendulum arm and slide table
Accurate and smooth movements of the rig
Mine-adapted, sturdy carrier
Control систем – maximum сигурност for тхе miners
EDS control system
Basic functions such as the anti-jamming system and fast rock drill return and forward movement
Remote control system for maximum safety during positioning, setting up and drilling
General – Best quality guaranteed
Firm steel protective FOPS proofed roof for the maximum safety Automatic hydraulic -driven cable reel for customer requirements Electrically driven compressor
Working lights on tripods
Спецификацијаs
| Rock Drill | ZDG550 |
| Shank adapter | R32 T38 R38 |
| Hole diameter | 45mm-64mm |
| Feed impact force | ≤425 J |
| Percussion power | 24Kw |
| Precussion rate | 75Hz Max. |
| Hydraulic pressure | 200 bar |
| Rotation system | Separate rotation |
| Rotation speed | 0-300 rpm |
| Rotation torque, max | 980 N.m |
| Water consumption, max | 2 L/s |
| Тежина | 180 Kg |
| Sound Level | <110 dB(A) |
| Feed | |
| Adapt to drilling width | 3500-4300mm |
| Adapt to drilling height | 2700-3300mm |
| Drill rod length | 915mm-1525mm |
| Drilling unit | |
| Rod retainer | Manual, for one feed |
| Drilling up to | 20 meters |
| Drilling force | Max. 23kN |
| Adaptable to R32, R38, T38 speedrods |
| Positioning систем | |
| Feed extension (with option drill steel) | 650-1200mm |
| Sliding table for parallelism | Automatic hydraulic |
| Stinger backward on feed | 600mm |
| Stinger forward on feed | 1150mm |
| Feed dump, drilling | +15° forward and 80°
backward |
| Roll-over angle | 360° |
| Visual angle indicators | 2 pcs feed tilt and side angle |
| Air Систем | |
| Compressor | Chinese brand |
| Air pressure gauge | Да |
| Capacity. Max at 10 bar | 600L/Min |
| Hole blowing kit with external air | 250-300L/min |
| Control system | |
| Remote— control automatic drilling | 50m |
| Anti-jamming system | Да |
| Electrical Direct system | Да |
| Power pack | |
| Hydraulic pump for percussion, positioning, feed | Да |
| Hydraulic pump for rotation | Да |
| System pressure,max | 200 bar |
| Pumps unloaded at start | Да |
| Hydraulic oil tank, volume max | 165L |
| Low oil level indicator and shut down | Да |
| Oil temperature gauge on oil tank, electronically supervised | Да |
| Filtration, absolute | 12 µm |
| Oil filter indicator | Да |
| Water cooled oil in stainless steel | Да |
| Mineral hydraulic oil |
| Electrical систем | |
| Electric motor | ABB YX3 250M-4(B5) |
| Total installed power | 68kW |
| Main motors | 55kW |
| Standard voltages | 380-1000V |
| Frequency | 50-60Hz |
| Staring method | star/delta (380-690V) |
| direct(1000V) |
| Percussion hour meters on operator display | Да |
| Digital volt/amperage meter in electric cabinet | Да |
| Phase sequence indicator | Да |
| Earth fault indicator | Да |
| Battery charger | Да |
| Transformer | 4kVA |
| Working lights on tripods | 2x200W, 24V |
| Limit switch for cable reel | Yes, at the operator station |
| Emergency stop | On the electric cabinet and at the right side machine |
| Laser positioning light | At each side |
| Water Систем | |
| Electric water boost pump | Да |
| Capacity at 10 bar boost | 200 L/min, Max |
| Water pressure gauge / water flow guard | Да |
| Min. Water inlet pressure, bar | 2 bar |
| Carrier | |
| Мотор | Дизелски мотор |
| Power rating at 2500rpm | 52kW (75hp) |
| Torque at 1500rpm | 258Nm |
| Fixed seat for tramming with safety belt | Да |
| Articulated Steering | ± 41 ° steering angle |
| FOPS- approved protective roof | Да |
| Horn, beacon and reverse alarm | Да |
| Four— wheel drive | Да |
| Hydrostatic power steering system | Да |
| Hydrostatic transmission | Clark |
| Front axle | Chinese brand |
| Rear axle | ±10° oscillation |
| Tyres |
8.25xR15 |
| Clearance outside axles | 15° |
| Hydraulic jacks, front | 2 extendable |
| Hydraulic jacks, rear | 2 |
| Service brakes | 2 separate circuits |
| Emergency and parking brakes | SHAR |
| Fuel tank, volume | 60L |
| Electric system | 24V |
| Batteries | 2 x 12V, 70Ah |
| Tramming light | 8 x 70W |
| Working light | 2x200W, 24V |
| Central lubrication system | Да |
| Fire extinguisher | 1x6kg |
| Gradeability at max.load on drive wheels | 1:4 |
| Silencer | Да |
| Catalyzer | Да |
| Tramming speed on flat ground | >10 km/h |
| Tramming speed on incline 1:8 | > 4km/h |
| Outlet for communication radio and USB | Да |
Measurements
| Turning radius(depending on surface) | |
| Споља | 4400mm |
| Inner | 2500mm |
| Откривање тла | 260mm |
| Recommended cablesize и length | ||
| Voltage | Димензија | Дужина |
| 380V | 4×30mm2 | 80m |
| 660V | 4x25mm2 | 100m |
| 1140V | 3×25+3x6mm2 | 145m |
Protection color in yellow/green/ customer’s requirement
Recommendations are givenfor surrounding temperature of 40°C
Документација:
2 x Operator’s manual
2 x Maintenance manual
2 x Technical manual (in English only)
2 x Parts manual (in English only)
4 x CD of manuals (PDF files)
КИНГДАО ЗОНГДА МАЦХИНЕРИ ЦО., ЛТД је професионална производња која се фокусира на истраживање и развој, производњу, продају и сервис подземних рударских машина, добављача решења и извођача рударских пројеката у Кини са јаком свеобухватном снагом и богатим искуством у рударској индустрији .
Имамо више од 30 професионалних и искусних рударских стручњака и инжењера и 200 особља за Рамп; Д, производња, КЦ, техничка подршка након продаје итд.
Испунили смо своју обавезу да знање претворимо у вредност пружајући свеобухватан спектар интегрисане опреме и услуга који економично трансформишу рудна тела у висококвалитетне минералне производе за купце.
О: Производимо подземна рударска возила и резервне делове за руднике метала.
О: Да.
О: Наши котати обично под ЦИФ условима укључују терет и осигурање, али без тарифа.
О: Обично 1 или 2 месеца. Да и понекад су доступне залихе.
О: Наш партнер шпедитера ће организовати одговарајуће решење за превоз и може организовати услугу од врата до врата.
О: Имамо посебну и детаљну политику гаранције.
О: Да.
О: Преферира се трансфер банке ТТ.
О: Обично 1 до 2 месеца.
О: Да, али само ЛЦ на видику.
О: Пружени смо и локални и мрежни технички сервис након салве.
У зависности од снажних техничких способности и богатог искуства, ЗОНГДА пружа ЕПЦ услугу домаћим и међународним клијентима и има обилно искуство у ЕПЦ пројектима у Кини.