Proizvodi

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64  remote-control  underground  long-hole drilling  rig  is  used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling  1.5meters  parallel  holes,  upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole  drilling  for  every  application.  A high-performance  patent- winning  ZDG550  hydraulic  rock  drill  with  the  24Kw  impact  power  is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only  top-notch  precision,  versatility  and  flexibility,  but  also  with  the maximum safety during setup and positioning.

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64  remote-control  underground  long-hole drilling  rig  is  used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling  1.5meters  parallel  holes,  upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole  drilling  for  every  application.  A high-performance  patent- winning  ZDG550  hydraulic  rock  drill  with  the  24Kw  impact  power  is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only  top-notch  precision,  versatility  and  flexibility,  but  also  with  the maximum safety during setup and positioning.

Detalji o proizvodu

ZDTC64 Remote–control

Underground Long–hole Drilling Rig

 

 

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64  remote-control  underground  long-hole drilling  rig  is  used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling  1.5meters  parallel  holes,  upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole  drilling  for  every  application.  A high-performance  patent- winning  ZDG550  hydraulic  rock  drill  with  the  24Kw  impact  power  is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only  top-notch  precision,  versatility  and  flexibility,  but  also  with  the maximum safety during setup and positioning.

 

Main Advantages of Rock drill

 

ZDG550 rock drill with impact power of 24Kw and impact frequency up to 75Hz maximum

 

High drilling speed and low failure rate esp. for hard rock condition

 

Made  by  our  own factory  means  low  costs  and faster  delivery  on

spare parts, saving the time and expenses of the miners

 

Self-lubrication    material    is    applied    in    the    rock    drills    -the maintenance period is longer than similar products

 

Pressurized    housing    and    mating    surfaces   to    reduce    internal contamination of the rock drill and the system – the life circle is longer than similar products

 

 

 

 

 

Positioning unit – high mobility

 

Feed with tilt, rotation, pendulum arm and slide table

Accurate and smooth movements of the rig

Mine-adapted, sturdy carrier

 

Control sistem – maximum sigurnost for u miners

 

EDS control system

Basic functions such as the anti-jamming system and fast rock drill return and forward movement

Remote control system for maximum safety during positioning, setting up and drilling

General – Best quality guaranteed

 

Firm steel protective FOPS proofed roof for the maximum safety   Automatic hydraulic -driven cable reel for customer requirements Electrically driven compressor

Working lights on tripods

 

Specifikacijas

 

Rock Drill ZDG550
Shank adapter R32 T38 R38
Hole diameter 45mm-64mm
Feed impact force ≤425 J
Percussion power 24Kw
Precussion rate 75Hz Max.
Hydraulic pressure 200 bar
Rotation system Separate rotation
Rotation speed 0-300 rpm
Rotation torque, max 980 N.m
Water consumption, max 2 L/s
Težina 180 Kg
Sound Level <110 dB(A)

 

 

Feed
Adapt to drilling width 3500-4300mm
Adapt to drilling height 2700-3300mm
Drill rod length 915mm-1525mm

 

 

Drilling unit
Rod retainer Manual, for one feed
Drilling up to 20 meters

 

 

 

Drilling force Max. 23kN
Adaptable to R32, R38, T38 speedrods

 

 

Positioning sistem
Feed extension (with option drill steel) 650-1200mm
Sliding table for parallelism Automatic hydraulic
Stinger backward on feed 600mm
Stinger forward on feed 1150mm
Feed dump, drilling +15° forward and 80°

backward

Roll-over angle 360°
Visual angle indicators 2 pcs feed tilt and side angle

 

 

Air Sistem
Compressor Chinese brand
Air pressure gauge Da.
Capacity. Max at 10 bar 600L/Min
Hole blowing kit with external air 250-300L/min

 

 

 

Control system
Remote— control automatic drilling 50m
Anti-jamming system Da.
Electrical Direct system Da.

 

 

 

 

Power pack
Hydraulic pump for percussion, positioning, feed Da.
Hydraulic pump for rotation Da.
System pressure,max 200 bar
Pumps unloaded at start Da.
Hydraulic oil tank, volume max 165L
Low oil level indicator and shut down Da.
Oil temperature gauge on oil tank, electronically supervised Da.
Filtration, absolute 12 µm
Oil filter indicator Da.
Water cooled oil in stainless steel Da.
Mineral hydraulic oil

 

 

Electrical sistem
Electric motor ABB YX3 250M-4(B5)
Total installed power 68kW
Main motors 55kW
Standard voltages 380-1000V
Frequency 50-60Hz
Staring method star/delta (380-690V)
direct(1000V)

 

 

 

Percussion hour meters on operator display Da.
Digital volt/amperage meter in electric cabinet Da.
Phase sequence indicator Da.
Earth fault indicator Da.
Battery charger Da.
Transformer 4kVA
Working lights on tripods 2x200W, 24V
Limit switch for cable reel Yes, at the operator station
Emergency stop On the electric cabinet and at the right side machine
Laser positioning light At each side

 

 

Water Sistem
Electric water boost pump Da.
Capacity at 10 bar boost 200 L/min, Max
Water pressure gauge / water flow guard Da.
Min. Water inlet pressure, bar 2 bar

 

 

Carrier
Motor Dizel motor
Power rating at 2500rpm 52kW   (75hp)
Torque at 1500rpm 258Nm
Fixed seat for tramming with safety belt Da.

 

 

 

Articulated Steering ±  41  ° steering angle
FOPS- approved protective roof Da.
Horn, beacon and reverse alarm Da.
Four— wheel drive Da.
Hydrostatic power steering system Da.
Hydrostatic transmission Clark
Front axle Chinese brand
Rear axle ±10° oscillation
Tyres  

8.25xR15

Clearance outside axles 15°
Hydraulic jacks, front 2 extendable
Hydraulic jacks, rear 2
Service brakes 2 separate circuits
Emergency and parking brakes SHAR
Fuel tank, volume 60L
Electric system 24V
Batteries 2 x 12V, 70Ah
Tramming light 8 x 70W
Working light 2x200W, 24V
Central lubrication system Da.
Fire extinguisher 1x6kg

 

 

 

Gradeability at max.load on drive wheels 1:4
Silencer Da.
Catalyzer Da.
Tramming speed on flat ground >10 km/h
Tramming speed on incline 1:8 > 4km/h
Outlet for communication radio and USB Da.

 

 

 

 

 

Measurements

 

 

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

Turning radius(depending on surface)
Vanjski 4400mm
Inner 2500mm
Čistoća zemlje 260mm

 

 

 

 

 

Recommended cablesize i length
Voltage Dimenzija Dužina
380V 4×30mm2 80m
660V 4x25mm2 100m
1140V 3×25+3x6mm2 145m

Protection color in yellow/green/ customer’s requirement

Recommendations are givenfor surrounding temperature of 40°C

 

Dokumentacija:

2 x Operator’s manual

2 x Maintenance manual

2 x Technical manual (in English only)

2 x Parts manual (in English only)

4 x CD of manuals (PDF files)

 

 

 

 

 

 

 

 

 

 

 

Srodni proizvodi
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Tehnički crtež i dimenzije
Profil kompanije

QINGDAO ZONGDA MACHINERY CO., LTD je profesionalna proizvodnja fokusirana na istraživanje i razvoj, proizvodnju, prodaju i servis podzemnih rudarskih mašina, dobavljač rješenja i izvođač rudarskih projekata u Kini sa snažnom sveobuhvatnom snagom i bogatim iskustvom u rudarskoj industriji.
Imamo više od 30 profesionalnih i iskusnih rudarskih stručnjaka i inženjera i 200 osoblja za istraživanje i razvoj. D, proizvodnja, kontrola kvaliteta, tehnička podrška nakon prodaje itd.
Ispunili smo našu posvećenost pretvaranju znanja u vrijednost pružanjem sveobuhvatne palete integrisane opreme i usluga koje troškovno efikasno pretvaraju ruda u visokokvalitetne mineralne proizvode za kupce.

Pakiranje i dostava
Često postavljana pitanja
1. Koje mehaničke proizvode uglavnom proizvodite? Postoje li orijentacije specifične za industriju?  

O: Proizvodimo podzemna rudarska vozila i rezervne dijelove za rudnike metala.

O: Da.

O: Naše ponude obično pod CIF uslovima uključuju teret i osiguranje, ali bez carina. 

O: Obično 1 ili 2 mjeseca. Da i postoje zalihe dostupne ponekad.

O: Naš partner za spediciju će organizovati odgovarajuće rešenje za transport i može organizovati uslugu od vrata do vrata. 

O: Imamo posebnu i detaljnu garancijsku politiku.

O: Da.

O: TT bankovni transfer je preferiran.

O: Obično 1 do 2 mjeseca. 

O: Da, ali samo LC na vidiku.

O: Imamo lokalnu i online tehničku uslugu nakon masaža. 

Kontaktirajte nas

Kontaktirajte nas

U zavisnosti od snažne tehničke sposobnosti i bogatog iskustva, ZONGDA pruža EPC uslugu domaćim i međunarodnim klijentima i ima bogato iskustvo u EPC projektima u Kini.

Dobijte ponudu

Tražite ponudu