Sản phẩm

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64  remote-control  underground  long-hole drilling  rig  is  used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling  1.5meters  parallel  holes,  upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole  drilling  for  every  application.  A high-performance  patent- winning  ZDG550  hydraulic  rock  drill  with  the  24Kw  impact  power  is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only  top-notch  precision,  versatility  and  flexibility,  but  also  with  the maximum safety during setup and positioning.

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64  remote-control  underground  long-hole drilling  rig  is  used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling  1.5meters  parallel  holes,  upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole  drilling  for  every  application.  A high-performance  patent- winning  ZDG550  hydraulic  rock  drill  with  the  24Kw  impact  power  is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only  top-notch  precision,  versatility  and  flexibility,  but  also  with  the maximum safety during setup and positioning.

Chi tiết sản phẩm

ZDTC64 Remote–control

Underground Long–hole Drilling Rig

 

 

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

ZDTC64  remote-control  underground  long-hole drilling  rig  is  used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling  1.5meters  parallel  holes,  upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole  drilling  for  every  application.  A high-performance  patent- winning  ZDG550  hydraulic  rock  drill  with  the  24Kw  impact  power  is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only  top-notch  precision,  versatility  and  flexibility,  but  also  with  the maximum safety during setup and positioning.

 

Main Advantages of Rock drill

 

ZDG550 rock drill with impact power of 24Kw and impact frequency up to 75Hz maximum

 

High drilling speed and low failure rate esp. for hard rock condition

 

Made  by  our  own factory  means  low  costs  and faster  delivery  on

spare parts, saving the time and expenses of the miners

 

Self-lubrication    material    is    applied    in    the    rock    drills    -the maintenance period is longer than similar products

 

Pressurized    housing    and    mating    surfaces   to    reduce    internal contamination of the rock drill and the system – the life circle is longer than similar products

 

 

 

 

 

Positioning unit – high mobility

 

Feed with tilt, rotation, pendulum arm and slide table

Accurate and smooth movements of the rig

Mine-adapted, sturdy carrier

 

Control hệ thống – maximum an toàn for của miners

 

EDS control system

Basic functions such as the anti-jamming system and fast rock drill return and forward movement

Remote control system for maximum safety during positioning, setting up and drilling

General – Best quality guaranteed

 

Firm steel protective FOPS proofed roof for the maximum safety   Automatic hydraulic -driven cable reel for customer requirements Electrically driven compressor

Working lights on tripods

 

Thông số kỹ thuậts

 

Rock Drill ZDG550
Shank adapter R32 T38 R38
Hole diameter 45mm-64mm
Feed impact force ≤425 J
Percussion power 24Kw
Precussion rate 75Hz Max.
Hydraulic pressure 200 bar
Rotation system Separate rotation
Rotation speed 0-300 rpm
Rotation torque, max 980 N.m
Water consumption, max 2 L/s
Trọng lượng 180 Kg
Sound Level <110 dB(A)

 

 

Feed
Adapt to drilling width 3500-4300mm
Adapt to drilling height 2700-3300mm
Drill rod length 915mm-1525mm

 

 

Drilling unit
Rod retainer Manual, for one feed
Drilling up to 20 meters

 

 

 

Drilling force Max. 23kN
Adaptable to R32, R38, T38 speedrods

 

 

Positioning hệ thống
Feed extension (with option drill steel) 650-1200mm
Sliding table for parallelism Automatic hydraulic
Stinger backward on feed 600mm
Stinger forward on feed 1150mm
Feed dump, drilling +15° forward and 80°

backward

Roll-over angle 360°
Visual angle indicators 2 pcs feed tilt and side angle

 

 

Air Hệ thống
Compressor Chinese brand
Air pressure gauge Vâng
Capacity. Max at 10 bar 600L/Min
Hole blowing kit with external air 250-300L/min

 

 

 

Control system
Remote— control automatic drilling 50m
Anti-jamming system Vâng
Electrical Direct system Vâng

 

 

 

 

Power pack
Hydraulic pump for percussion, positioning, feed Vâng
Hydraulic pump for rotation Vâng
System pressure,max 200 bar
Pumps unloaded at start Vâng
Hydraulic oil tank, volume max 165L
Low oil level indicator and shut down Vâng
Oil temperature gauge on oil tank, electronically supervised Vâng
Filtration, absolute 12 µm
Oil filter indicator Vâng
Water cooled oil in stainless steel Vâng
Mineral hydraulic oil

 

 

Electrical hệ thống
Electric motor ABB YX3 250M-4(B5)
Total installed power 68kW
Main motors 55kW
Standard voltages 380-1000V
Frequency 50-60Hz
Staring method star/delta (380-690V)
direct(1000V)

 

 

 

Percussion hour meters on operator display Vâng
Digital volt/amperage meter in electric cabinet Vâng
Phase sequence indicator Vâng
Earth fault indicator Vâng
Battery charger Vâng
Transformer 4kVA
Working lights on tripods 2x200W, 24V
Limit switch for cable reel Yes, at the operator station
Emergency stop On the electric cabinet and at the right side machine
Laser positioning light At each side

 

 

Water Hệ thống
Electric water boost pump Vâng
Capacity at 10 bar boost 200 L/min, Max
Water pressure gauge / water flow guard Vâng
Min. Water inlet pressure, bar 2 bar

 

 

Carrier
Động cơ Động cơ diesel
Power rating at 2500rpm 52kW   (75hp)
Torque at 1500rpm 258Nm
Fixed seat for tramming with safety belt Vâng

 

 

 

Articulated Steering ±  41  ° steering angle
FOPS- approved protective roof Vâng
Horn, beacon and reverse alarm Vâng
Four— wheel drive Vâng
Hydrostatic power steering system Vâng
Hydrostatic transmission Clark
Front axle Chinese brand
Rear axle ±10° oscillation
Tyres  

8.25xR15

Clearance outside axles 15°
Hydraulic jacks, front 2 extendable
Hydraulic jacks, rear 2
Service brakes 2 separate circuits
Emergency and parking brakes SHAR
Fuel tank, volume 60L
Electric system 24V
Batteries 2 x 12V, 70Ah
Tramming light 8 x 70W
Working light 2x200W, 24V
Central lubrication system Vâng
Fire extinguisher 1x6kg

 

 

 

Gradeability at max.load on drive wheels 1:4
Silencer Vâng
Catalyzer Vâng
Tramming speed on flat ground >10 km/h
Tramming speed on incline 1:8 > 4km/h
Outlet for communication radio and USB Vâng

 

 

 

 

 

Measurements

 

 

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

 

ZDTC64 Remote-control Underground Long-hole Drilling Rig

Turning radius(depending on surface)
Ngoài 4400mm
Inner 2500mm
Giải phóng mặt đất 260mm

 

 

 

 

 

Recommended cablesize và length
Voltage Kích thước Chiều dài
380V 4×30mm2 80m
660V 4x25mm2 100m
1140V 3×25+3x6mm2 145m

Protection color in yellow/green/ customer’s requirement

Recommendations are givenfor surrounding temperature of 40°C

 

Tài liệu:

2 x Operator’s manual

2 x Maintenance manual

2 x Technical manual (in English only)

2 x Parts manual (in English only)

4 x CD of manuals (PDF files)

 

 

 

 

 

 

 

 

 

 

 

Sản phẩm liên quan
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Bản vẽ kỹ thuật và kích thước
Hồ sơ công ty

QINGDAO ZONGDA MACHINERY CO., LTD là một nhà sản xuất chuyên nghiệp tập trung vào nghiên cứu và phát triển, sản xuất, bán hàng và dịch vụ máy móc khai thác mỏ ngầm, một nhà cung cấp giải pháp và một nhà thầu dự án khai thác mỏ ở Trung Quốc với sức mạnh toàn diện mạnh mẽ và kinh nghiệm phong phú trong ngành công nghiệp khai thác mỏ.
Chúng tôi có hơn 30 chuyên gia và kỹ sư khai thác mỏ chuyên nghiệp và kinh nghiệm và 200 nhân viên cho R & amp; D, Sản xuất, QC, Hỗ trợ kỹ thuật sau bán hàng và v.v.
Chúng tôi đã thực hiện cam kết của mình để biến kiến ​​thức thành giá trị bằng cách cung cấp một loạt các thiết bị và dịch vụ tích hợp toàn diện chuyển đổi cơ thể quặng thành các sản phẩm khoáng chất cao cấp cho khách hàng.

Bao bì & Vận chuyển
Câu hỏi thường gặp
1. Các sản phẩm cơ khí bạn chủ yếu sản xuất? Có hướng dẫn cụ thể nào trong ngành không?  

A: Chúng tôi sản xuất xe khai thác mỏ ngầm và phụ tùng cho các mỏ kim loại.

A: Vâng.

A: Báo giá của chúng tôi thường theo các điều khoản CIF bao gồm vận chuyển hàng hóa và bảo hiểm nhưng không có thuế quan. 

A: 1 hoặc 2 tháng thường. Có và có kho có sẵn một lúc nào đó.

A: Đối tác chuyển hàng của chúng tôi sẽ sắp xếp giải pháp vận chuyển thích hợp và cũng có thể sắp xếp dịch vụ cửa đến cửa. 

A: Chúng tôi có chính sách bảo hành đặc biệt và chi tiết.

A: Vâng.

A: TT chuyển khoản ngân hàng là ưa thích.

A: 1 đến 2 tháng thường. 

A: Vâng, nhưng chỉ có LC trong tầm nhìn.

A: Chúng tôi có cả dịch vụ kỹ thuật địa phương và trực tuyến được cung cấp. 

Liên hệ với chúng tôi

Liên hệ

Tùy thuộc vào khả năng kỹ thuật mạnh mẽ và kinh nghiệm phong phú, ZONGDA cung cấp dịch vụ EPC cho khách hàng trong nước và quốc tế và có kinh nghiệm dự án EPC phong phú ở Trung Quốc.

Nhận một báo giá

Yêu cầu báo giá