Sản phẩm

ZDTC89 Remote-control Underground Drilling Rig

ZDTC89 Remote-control Underground Drilling Rigs

ZDTC89 Remote-control Underground Drilling Rig

ZDTC89 Remote-control Underground Drilling Rigs

Chi tiết sản phẩm

 

Dữ liệu kỹ thuật

ZDTC89 Remote-control Underground

Drilling Rig

 

ZDTC89 Remote-control UndergroundDrilling Rig ZDTC89 Remote-control UndergroundDrilling Rig

 

 

 

 

ZDTC89 Remote-control Underground Drilling Rigs

 

ZDTC89 remote-control underground drilling rigs are used for production drilling in underground mining applications. The rig is a long-hole drilling rig for small to medium – sized drifts in 76mm to 127mm hole range. It provides the max. coverage area up to 4.6 meters x 5 meters with feed dump of +20° forward and -80° backward. It is also capable of 360° ring drilling parallel holes upwards, downwards and in the side walls. It is equipped with a rod carousel with 17 rods for drilling length up to 32 meters. With a automatic rod handling system (RHS), PLC control system, remote-control system, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent-winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. With 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.

 

Main Advantages

 

  • ZDG550 rock drill with impact power of 24Kw
  • High drilling speed and low failure rate, especially design for hard rocks
  • Made by our own company means low costs and faster delivery on spare parts, save the time and expenses of the miners
  • Self-lubrication material is applied in the rock drills – the maintenance period is longer than similar products
  • Pressurized housing and mating surfaces to reduce internal contamination of the rock drill and the system – the life circle is longer than similar products

 

 

Drilling unit- Accurate and intelligent

 

  • Automatic rod handling system (RHS) with 17 rods for drilling length up to 32 meters
  • Feedwith hydraulic two-stage cylinder
  • Front and rear mounted stringers for accuracypositioning
  • Drillsteelsupport for guidance for support andposition

 

ZDTC89 Remote-control UndergroundDrilling Rig

Positioning unit – high mobility

 

  • Feed with tilt, rotation, pendulum arm and slidetable
  • Accurate and smooth movements of therig
  • Mine-adapted, sturdycomponents

 

Control system – maximum safety for the miners

 

  • PLC control system
  • Anti-jamming system forthe
  • Remotecontrol system for maximum safety during positioning and drilling

 

 

Carrier – Dana Axel and Deutz Engine

 

  • Articulatedsteering and four-­‐wheel drive
    • Sturdy, articulated carrier with four-wheel drive – Dana Axle fromGermany

 

  • Powered by a strong and 5-cylinder Deutz diesel engine-EPA III/COM III approved and qualityguaranteed
  • Four jacks for stable set

 

 

General – Best quality guaranteed

 

  • Firm steel protective FOPS proofed roof for the maximumsafety
  • Automatic hydraulic -driven cable reel for customerrequirements
  • Electrically driven compressor
  • Michelin tyres – the most famous tyres brand fromFrance
  • Trolley-­‐mountedoperator panel
  • Working lights ontripods

 

 

 

Thông số kỹ thuật

 

 

Rock Drill ZDG550
Shank adapter R32 T38 T45 T51
Hole diameter 51mm­102mm
Feed impact force ≤425 J
Impact power 24KW
Impact rate 5o­68HZ
Hydraulic pressure 200 bar
Rotation system Separate rotation
Rotation speed 0­300 rpm
Rotation torque, max 980 N.m
Lub air consump at 6 bar 1.5 L/s
Water consumption, max 2 L/s
Trọng lượng 180 Kg
Sound Level <110 dB(A)

 

Feed  
Adapt to drilling width 3300­3900mm
Adapt to drilling height 4000­5000mm
Drill rod length 1500­1800mm

 

Drilling unit  
Rod Handling system, RHS 17 17+1 rods
Adaptable to 4′,5’and 6’rods Vâng
Adaptable to R32,T38,T45 Speed rods Vâng
Adaptable to TDS 56 and TDS 64 drill tubes Vâng
Mechanized drilling up to 30 m Vâng

 

Positioning system  
Feed extension (with 5’and 6′ drill steel) Từ 1200mm
Rotary Acurator BHR 30 for 360 ring drilling  
Sliding table gives 1.5m feed parallel positioning  
Pendulum arm gives 1.5m feed parallel positioning in the sidewalls. Add further 1.5 feed parallel positioning upwards/downwards  
Stinger backward on feed 1150mm
Stinger forward on feed 1150mm
Feed dump, drilling +20° forward and 80° backward
Rig alignment laser Vâng

 

Air System  
Compressor Chinese brand
Air pressure gauge Vâng
Capacity. Max at 7 bar 300L/Min
Lubricated air for the rock drill Vâng
Hệ thống điều khiển  
Remote­­‐control automatic drilling 50m
Anti­jamming system Vâng

 

Power pack  
Hydraulic pump for percussion, positioning, feed Vâng
Hydraulic pump for rotation Vâng
Pumps unloaded at start Vâng
Low oil level indicator and shut down Vâng
Oil temperature gauge on oil tank, electronically

supervised

Vâng
Electric oil filling pump Vâng
Filtration, absolute 16μm
Oil filter indicator Vâng
Water cooled oil in stainless steel Vâng
Mineral hydraulic oil  

 

 

Hệ thống điện  
Electric motor ABB YX3 250M­4(B5)
Total installed power 55kW
Staring method star/delta (380­690V)
  direct(1000V)
Thermal overload protection for electric

 

motors

 
Percussion hour meters Vâng
Digital volt/amperage meter in electric cabinet Vâng
Phase sequence indicator Vâng
Earth fault indicator Vâng
Battery charger Vâng
Transformer 5kVA
Working lights on tripods 2x200W, 24V
Limit switch for cable reel Vâng

 

 

Water System  
Hydraulic driven water pump ABB 7.5KW
Water booster pump max. capacity at 7 bar 115 l/min
Water pressure gauge Vâng
Water flow guard Vâng
Min. Water inlet pressure, bar 4 bar

 

 

Carrier  
Động cơ Deutz F5L 912W, Diesel
Power rating at 2500rpm 55kW (75hp)
Torque at 1550rpm 258Nm
Fixed seat for tramming with safety belt Vâng
Articulated Steering  

± 40 °steering angle

Spirit levels Vâng
Horn, beacon and reverse alarm Vâng
Four­­‐wheel drive Vâng
Hydrostatic power steering system Vâng
Hydrostatic transmission Clark
Front axle Dana 112
Rear axle  

Dana 112,  ±10° oscillation

Tyres Michelin XZR

 

8.25xR15

Clearance outside axles  

15°

Hydraulic jacks, front 2 extendable
Hydraulic jacks, rear 2
Service brakes 2 separate circuits
Emergency and parking brakes SHAR
Fuel tank, volume 60L
Electric system 24V
Batteries 2 x 12V, 70Ah
Tramming light 8 x 70W
Working light 2x200W, 24V
Central lubrication system  
Fire extinguisher Vâng
Gradeability at max.load on drive wheels 1:4
Silencer Vâng
Catalyzer Vâng
Tramming speed on flat ground >10 km/h
Tramming speed on incline 1:8 > 4km/h
Rig alignment laser Vâng

 

MeasurementsZDTC89 Remote-control UndergroundDrilling Rig ZDTC89 Remote-control UndergroundDrilling Rig ZDTC89 Remote-control UndergroundDrilling Rig

 

 

 

Kích thước Chiều dài Chiều rộng Height
Tramming 6880mm 2380mm 2810mm
Drilling 6880mm 3240mm 3670mm
Giải phóng mặt đất 260mm    
Gross weight 12500kG    

 

 

 

Turning radius(depending on surface)  
Ngoài 5100mm
Inner 2700mm

 

 

Recommended cablesize

 

and length

   
Voltage Kích thước Chiều dài
380V 4×30mm² 80m
660V  

4x25mm²

100m
1140V  

3×25+3x6mm²

145m

Protection yellow/green

Recommendations are given for surrounding temperature of 40°C

 

 

 

 

 

 

 

 

 

Sản phẩm liên quan
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Bản vẽ kỹ thuật và kích thước
Hồ sơ công ty

QINGDAO ZONGDA MACHINERY CO., LTD là một nhà sản xuất chuyên nghiệp tập trung vào nghiên cứu và phát triển, sản xuất, bán hàng và dịch vụ máy móc khai thác mỏ ngầm, một nhà cung cấp giải pháp và một nhà thầu dự án khai thác mỏ ở Trung Quốc với sức mạnh toàn diện mạnh mẽ và kinh nghiệm phong phú trong ngành công nghiệp khai thác mỏ.
Chúng tôi có hơn 30 chuyên gia và kỹ sư khai thác mỏ chuyên nghiệp và kinh nghiệm và 200 nhân viên cho R & amp; D, Sản xuất, QC, Hỗ trợ kỹ thuật sau bán hàng và v.v.
Chúng tôi đã thực hiện cam kết của mình để biến kiến ​​thức thành giá trị bằng cách cung cấp một loạt các thiết bị và dịch vụ tích hợp toàn diện chuyển đổi cơ thể quặng thành các sản phẩm khoáng chất cao cấp cho khách hàng.

Bao bì & Vận chuyển
Câu hỏi thường gặp
1. Các sản phẩm cơ khí bạn chủ yếu sản xuất? Có hướng dẫn cụ thể nào trong ngành không?  

A: Chúng tôi sản xuất xe khai thác mỏ ngầm và phụ tùng cho các mỏ kim loại.

A: Vâng.

A: Báo giá của chúng tôi thường theo các điều khoản CIF bao gồm vận chuyển hàng hóa và bảo hiểm nhưng không có thuế quan. 

A: 1 hoặc 2 tháng thường. Có và có kho có sẵn một lúc nào đó.

A: Đối tác chuyển hàng của chúng tôi sẽ sắp xếp giải pháp vận chuyển thích hợp và cũng có thể sắp xếp dịch vụ cửa đến cửa. 

A: Chúng tôi có chính sách bảo hành đặc biệt và chi tiết.

A: Vâng.

A: TT chuyển khoản ngân hàng là ưa thích.

A: 1 đến 2 tháng thường. 

A: Vâng, nhưng chỉ có LC trong tầm nhìn.

A: Chúng tôi có cả dịch vụ kỹ thuật địa phương và trực tuyến được cung cấp. 

Liên hệ với chúng tôi

Liên hệ

Tùy thuộc vào khả năng kỹ thuật mạnh mẽ và kinh nghiệm phong phú, ZONGDA cung cấp dịch vụ EPC cho khách hàng trong nước và quốc tế và có kinh nghiệm dự án EPC phong phú ở Trung Quốc.

Nhận một báo giá

Yêu cầu báo giá