



ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 remote-control underground long-hole drilling rig is used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling 1.5meters parallel holes, upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent- winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 remote-control underground long-hole drilling rig is used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling 1.5meters parallel holes, upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent- winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
ZDTC64 Remote–control
Underground Long–hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 remote-control underground long-hole drilling rig is used for production drilling in underground mining applications. The rig is a long- hole drilling rig for small to medium – sized drifts in 45 mm to 64mm hole range. It provides the max. coverage area up to 2.6 x 2.8 meters with feed dump of +15° forward and -80° backward. It is also capable of drilling 1.5meters parallel holes, upwards, downwards and in the side walls. With the PLC industrial control system, remote-control function, and computerized anti-jamming system, it can guarantee the optimum long-hole drilling for every application. A high-performance patent- winning ZDG550 hydraulic rock drill with the 24Kw impact power is installed on the rig. Even with 76mm drilling shank, the speed of drilling can reach to 1.2 meters per minute. The rig offers the miners with not only top-notch precision, versatility and flexibility, but also with the maximum safety during setup and positioning.
Main Advantages of Rock drill
ZDG550 rock drill with impact power of 24Kw and impact frequency up to 75Hz maximum
High drilling speed and low failure rate esp. for hard rock condition
Made by our own factory means low costs and faster delivery on
spare parts, saving the time and expenses of the miners
Self-lubrication material is applied in the rock drills -the maintenance period is longer than similar products
Pressurized housing and mating surfaces to reduce internal contamination of the rock drill and the system – the life circle is longer than similar products
Positioning unit – high mobility
Feed with tilt, rotation, pendulum arm and slide table
Accurate and smooth movements of the rig
Mine-adapted, sturdy carrier
Control mfumo – maximum usalama for ya miners
EDS control system
Basic functions such as the anti-jamming system and fast rock drill return and forward movement
Remote control system for maximum safety during positioning, setting up and drilling
General – Best quality guaranteed
Firm steel protective FOPS proofed roof for the maximum safety Automatic hydraulic -driven cable reel for customer requirements Electrically driven compressor
Working lights on tripods
Maelezos
| Rock Drill | ZDG550 |
| Shank adapter | R32 T38 R38 |
| Hole diameter | 45mm-64mm |
| Feed impact force | ≤425 J |
| Percussion power | 24Kw |
| Precussion rate | 75Hz Max. |
| Hydraulic pressure | 200 bar |
| Rotation system | Separate rotation |
| Rotation speed | 0-300 rpm |
| Rotation torque, max | 980 N.m |
| Water consumption, max | 2 L/s |
| uzito | 180 Kg |
| Sound Level | <110 dB(A) |
| Feed | |
| Adapt to drilling width | 3500-4300mm |
| Adapt to drilling height | 2700-3300mm |
| Drill rod length | 915mm-1525mm |
| Drilling unit | |
| Rod retainer | Manual, for one feed |
| Drilling up to | 20 meters |
| Drilling force | Max. 23kN |
| Adaptable to R32, R38, T38 speedrods |
| Positioning mfumo | |
| Feed extension (with option drill steel) | 650-1200mm |
| Sliding table for parallelism | Automatic hydraulic |
| Stinger backward on feed | 600mm |
| Stinger forward on feed | 1150mm |
| Feed dump, drilling | +15° forward and 80°
backward |
| Roll-over angle | 360° |
| Visual angle indicators | 2 pcs feed tilt and side angle |
| Air Mfumo | |
| Compressor | Chinese brand |
| Air pressure gauge | Ndiyo |
| Capacity. Max at 10 bar | 600L/Min |
| Hole blowing kit with external air | 250-300L/min |
| Control system | |
| Remote— control automatic drilling | 50m |
| Anti-jamming system | Ndiyo |
| Electrical Direct system | Ndiyo |
| Power pack | |
| Hydraulic pump for percussion, positioning, feed | Ndiyo |
| Hydraulic pump for rotation | Ndiyo |
| System pressure,max | 200 bar |
| Pumps unloaded at start | Ndiyo |
| Hydraulic oil tank, volume max | 165L |
| Low oil level indicator and shut down | Ndiyo |
| Oil temperature gauge on oil tank, electronically supervised | Ndiyo |
| Filtration, absolute | 12 µm |
| Oil filter indicator | Ndiyo |
| Water cooled oil in stainless steel | Ndiyo |
| Mineral hydraulic oil |
| Electrical mfumo | |
| Electric motor | ABB YX3 250M-4(B5) |
| Total installed power | 68kW |
| Main motors | 55kW |
| Standard voltages | 380-1000V |
| Frequency | 50-60Hz |
| Staring method | star/delta (380-690V) |
| direct(1000V) |
| Percussion hour meters on operator display | Ndiyo |
| Digital volt/amperage meter in electric cabinet | Ndiyo |
| Phase sequence indicator | Ndiyo |
| Earth fault indicator | Ndiyo |
| Battery charger | Ndiyo |
| Transformer | 4kVA |
| Working lights on tripods | 2x200W, 24V |
| Limit switch for cable reel | Yes, at the operator station |
| Emergency stop | On the electric cabinet and at the right side machine |
| Laser positioning light | At each side |
| Water Mfumo | |
| Electric water boost pump | Ndiyo |
| Capacity at 10 bar boost | 200 L/min, Max |
| Water pressure gauge / water flow guard | Ndiyo |
| Min. Water inlet pressure, bar | 2 bar |
| Carrier | |
| Injini | injini ya dizeli |
| Power rating at 2500rpm | 52kW (75hp) |
| Torque at 1500rpm | 258Nm |
| Fixed seat for tramming with safety belt | Ndiyo |
| Articulated Steering | ± 41 ° steering angle |
| FOPS- approved protective roof | Ndiyo |
| Horn, beacon and reverse alarm | Ndiyo |
| Four— wheel drive | Ndiyo |
| Hydrostatic power steering system | Ndiyo |
| Hydrostatic transmission | Clark |
| Front axle | Chinese brand |
| Rear axle | ±10° oscillation |
| Tyres |
8.25xR15 |
| Clearance outside axles | 15° |
| Hydraulic jacks, front | 2 extendable |
| Hydraulic jacks, rear | 2 |
| Service brakes | 2 separate circuits |
| Emergency and parking brakes | SHAR |
| Fuel tank, volume | 60L |
| Electric system | 24V |
| Batteries | 2 x 12V, 70Ah |
| Tramming light | 8 x 70W |
| Working light | 2x200W, 24V |
| Central lubrication system | Ndiyo |
| Fire extinguisher | 1x6kg |
| Gradeability at max.load on drive wheels | 1:4 |
| Silencer | Ndiyo |
| Catalyzer | Ndiyo |
| Tramming speed on flat ground | >10 km/h |
| Tramming speed on incline 1:8 | > 4km/h |
| Outlet for communication radio and USB | Ndiyo |
Measurements
| Turning radius(depending on surface) | |
| ya nje | 4400mm |
| Inner | 2500mm |
| Utoaji wa ardhi | 260mm |
| Recommended cablesize ya length | ||
| Voltage | Vipimo | Urefu |
| 380V | 4×30mm2 | 80m |
| 660V | 4x25mm2 | 100m |
| 1140V | 3×25+3x6mm2 | 145m |
Protection color in yellow/green/ customer’s requirement
Recommendations are givenfor surrounding temperature of 40°C
Nyaraka:
2 x Operator’s manual
2 x Maintenance manual
2 x Technical manual (in English only)
2 x Parts manual (in English only)
4 x CD of manuals (PDF files)
QINGDAO ZONGDA MACHINERY CO., LTD ni utengenezaji wa kitaalamu kuzingatia utafiti na maendeleo, uzalishaji, mauzo na huduma ya mashine za madini chini ya ardhi, muuzaji wa ufumbuzi na mkandarasi wa mradi wa madini nchini China na nguvu kubwa ya kina na uzoefu tajiri katika sekta ya madini.
Tuna zaidi ya 30 wataalamu wa utaalamu na uzoefu wa madini na wahandisi na wafanyakazi 200 kwa R & amp; D, Uzalishaji, QC, Baada ya Mauzo Msaada wa Ufundi na nk
Tumetimiza ahadi yetu ya kugeuza maarifa kuwa thamani kwa kutoa mbalimbali kamili ya vifaa vya jumuishi na huduma ambazo kwa gharama nafuu kubadilisha miili ya madini katika bidhaa za madini za daraja la juu kwa wateja.
J: Sisi kuzalisha magari ya madini ya chini ya ardhi na vipengele vya vifaa kwa ajili ya migodi ya chuma.
Jibu: Ndiyo.
J: Nnuku zetu kwa kawaida chini ya masharti ya CIF ni pamoja na mizigo na bima lakini hakuna ushuru.
A: Kwa kawaida miezi 1 au 2. Ndiyo na kuna hisa inapatikana wakati mwingine.
J: Mshirika wetu wa usafirishaji atapanga ufumbuzi sahihi wa usafirishaji na anaweza kupanga huduma ya mlango hadi mlango pia.
J: Tuna sera maalum na ya kina ya dhamana.
Jibu: Ndiyo.
J: TT Uhamishaji wa Benki unapendekezwa.
A: Kwa kawaida miezi 1 hadi 2.
J: Ndiyo, lakini tu LC katika macho.
J: Tuna huduma ya kiufundi ya ndani na ya mtandaoni baada ya salvages iliyotolewa.
Kulingana na uwezo mkubwa wa kiufundi na uzoefu tajiri, ZONGDA hutoa huduma ya EPC kwa wateja wa ndani na kimataifa na ina uzoefu mwingi wa mradi wa EPC nchini China.