





Données techniques
ZDFJ45/1
Underground Single-boom Face Drilling Jumbo
Features:
The drilling rig is equipped with a European made medium low pressure high-frequency hydraulic rock drill. Compared with high-pressure rock drills, medium and low-pressure hydraulic rock drills have lower impact oil pressure, seals, and hydraulic hoses that do not work in high-pressure environments, greatly extending their service life, more reliable performance, and lower maintenance costs. The rock drill used with the drilling rig adopts a stepped piston, which optimizes the transmission efficiency of shock waves, improves drilling speed, reduces tool consumption, and increases equipment safety;
Adopting a low pollution National IV emission Cummins diesel engine, when paired with a four-wheel hydraulic drive walking system, it can achieve continuously variable transmission, strong climbing ability, and fast driving speed; Simultaneously equipped with exhaust gas purification devices, greatly improving the working conditions underground.
Adopting a dual circuit hydraulic service brake system, coupled with a spring brake hydraulic release parking brake system, achieves dual safety of drilling vehicle braking, greatly improving the safety of underground operations;
Compact in appearance and flexible in turning, it can easily pass through the narrowest 2m wide tunnel or complete right angle turns in a 3.5m wide tunnel;
The spacious workspace and a series of automatic functions help drivers concentrate on safe, fast, and accurate drilling. The arrangement of the drilling rig ensures that the driver has a good view, and all maintenance parts are well protected while also being easy to access and maintain.
Technique Paramètres
| Dimensions And Weight | Drilling System | ||||||
| Longueur | 11570㎜ | Rock drill–Montabert | HC50/R38 | HC95SA | HC95LM/R38 | ||
| Largeur | 1750㎜ | Impact Power | 13KW | 20KW | 21KW | ||
| Height | 2000/3000㎜ | Impact Pressure | 130bar | 165-200bar | 180bar | ||
| Poids | 12750㎏ | Maximum rotational pressure | 150bar | 210bar | 210bar | ||
| Vitesse | 9±0.9㎞/h | Frequency | 62Hz | 62Hz | 62Hz | ||
| Gradabilité | 25%(14°) | Torque | 325Nm | 597Nm | 764Nm | ||
| Safety Protection | Aperture | aperture | 42-102mm | 42-102mm | |||
| Noise level | <100dB(A) | Promote beam flipping | 360° | ||||
| Adjustable safety ceiling | Meets the requirements for roll over and rockfall prevention | Advance the compensation stroke of the beam | 1600㎜ | ||||
| Air and Water Système | Drill arm model | Drill arm model | |||||
| Compresseur d'air | 1×JN4 | Drilling arm form | Automatic leveling | ||||
| Déplacement | 0.5m3/min | Drill arm telescopic | 1200㎜ | ||||
| Pression | 6-8bar | électrique Hhydraulique Pump Station | |||||
| Drill tail lubrication device | Electromagnetic pulse lubrication pump | moteur | 45kW | 55KW | 75kW | ||
| Lubrication gas consumption | 0.3m3/min | Impact/Propulsion/Drilling Arm | Axial variable displacement piston pump | ||||
| Lubrication fuel consumption | 180-250g/h | Rotation | Gear pump | ||||
| Water pump | 1×CR3 | Filtration | Filtration | 10μ | |||
| Puissance | 1.5KW | hydraulic oil tank | Réservoir d'huile hydraulique | 240L | |||
| Pump displacement | 3m3/h | Hydraulic cooler | Hydraulic cooler | Water cooler | |||
| Chassis | Working voltage | working voltage | |||||
| Diesel engine
|
Cummins 59kW/ 2500rpm | Frequency | 50Hz | ||||
| B3.9CS4 80C | Start mode | Star Triangle | |||||
| Exhaust purification | Exhaust catalytic converter | Cable reel | 1×F440 | ||||
| Drive system | Four wheel drive closed walking system | Cable capacity of the reel | 100m | 80m | |||
| Swing angle | Rear axle swing ± 7 ° | Cable specifications | 3×35+3G10 | 3×50+3G10 | |||
| Pneumatique | 11.00-20 | ||||||
| Steering mechanism | ± 40 ° articulated steering | ||||||
| Frein de stationnement | Frein humide à disques multiples | ||||||
| Walking brake | Dual circuit hydraulic brake | ||||||
| Réservoir à carburant | 60L | ||||||
Outline Dimensions
Turning Diagram
Working Section
QINGDAO ZONGDA MACHINERY CO., LTD est une fabrication professionnelle axée sur la recherche et le développement, la production, la vente et le service de machines minières souterraines, un fournisseur de solution et un entrepreneur de projet minier en Chine avec une forte force globale et une riche expérience dans l'industrie minière.
Nous avons plus de 30 experts et ingénieurs miniers professionnels et expérimentés et 200 employés pour la R & amp; D, Production, QC, Support technique après-vente et etc.
Nous avons rempli notre engagement de transformer la connaissance en valeur en fournissant une gamme complète d'équipements et de services intégrés qui transforment à un coût avantageux les corps de minerai en produits minéraux de haute qualité pour les clients.
R: Nous produisons des véhicules miniers souterrains et des pièces détachées pour les mines de métaux.
R : Oui.
R: Nos devis généralement sous les termes CIF incluent le fret et l'assurance mais pas les tarifs.
A: 1 ou 2 mois habituellement. Oui et il y a des stocks disponibles quelquefois.
R: Notre partenaire expéditeur organisera la solution de transport appropriée et peut également organiser le service de porte à porte.
A: Nous avons une politique de garantie spéciale et détaillée.
R : Oui.
R: TT Virement bancaire est préféré.
A: 1 à 2 mois habituellement.
R: Oui, mais seulement LC à vue.
R: Nous avons à la fois le service technique local et en ligne après-salves fournis.
En fonction de la forte capacité technique et de la riche expérience, ZONGDA fournit le service EPC aux clients nationaux et internationaux et a une abondante expérience de projet EPC en Chine.