Products

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;
Product Details

Technical DATA

ZDFJ45/1

Underground Single-boom Face Drilling JumboUnderground Single-boom Face Drilling Jumbo

 

Features:

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

 

  • The use of screw air compressors greatly saves energy and reduces pollution, making a tangible contribution to “saving China”, improving the working environment, and protecting human health;
  • Adopting a brand new independently designed Cartesian coordinate translational drilling arm. It can achieve automatic parallelism between the advancing beam and the initial position, facilitating quick and convenient drilling positioning; The drilling arm is sturdy and reliable, with the best cross-sectional coverage shape and no blind spots within the cross-sectional range; The drilling arm can also be used for lateral opening of stone gates and drilling of anchor rods;
  • Adopting a final hole stop device and a bottom cleaning function. The drilling process automatically stops advancing and rushing in after completion, and the bottom of the hole can be controlled by a handle to blow out the residue and water without the need for manual hole cleaning, shortening the operation cycle time;
  • Adopting anti “empty hitting” technology to achieve low push and low impact, high push and high impact, no push and no impact, avoiding “empty hitting” as much as possible, and protecting rock drills and drilling tools;

 

The drilling rig is equipped with a European made medium low pressure high-frequency hydraulic rock drill. Compared with high-pressure rock drills, medium and low-pressure hydraulic rock drills have lower impact oil pressure, seals, and hydraulic hoses that do not work in high-pressure environments, greatly extending their service life, more reliable performance, and lower maintenance costs. The rock drill used with the drilling rig adopts a stepped piston, which optimizes the transmission efficiency of shock waves, improves drilling speed, reduces tool consumption, and increases equipment safety;

 

Adopting a low pollution National IV emission Cummins diesel engine, when paired with a four-wheel hydraulic drive walking system, it can achieve continuously variable transmission, strong climbing ability, and fast driving speed; Simultaneously equipped with exhaust gas purification devices, greatly improving the working conditions underground.

 

Adopting a dual circuit hydraulic service brake system, coupled with a spring brake hydraulic release parking brake system, achieves dual safety of drilling vehicle braking, greatly improving the safety of underground operations;

 

Compact in appearance and flexible in turning, it can easily pass through the narrowest 2m wide tunnel or complete right angle turns in a 3.5m wide tunnel;

 

The spacious workspace and a series of automatic functions help drivers concentrate on safe, fast, and accurate drilling. The arrangement of the drilling rig ensures that the driver has a good view, and all maintenance parts are well protected while also being easy to access and maintain.

 

Technical Parameters

Dimensions And Weight Drilling System
Length 11570㎜ Rock drill–Montabert HC50/R38 HC95SA HC95LM/R38
Width 1750㎜ Impact Power 13KW 20KW 21KW
Height 2000/3000㎜ Impact Pressure 130bar 165-200bar 180bar
Weight 12750㎏ Maximum rotational pressure 150bar 210bar 210bar
Speed 9±0.9㎞/h Frequency 62Hz 62Hz 62Hz
Gradeability 25%(14°) Torque 325Nm 597Nm 764Nm
Safety Protection  Aperture aperture 42-102mm 42-102mm
Noise level <100dB(A) Promote beam flipping 360°
Adjustable safety ceiling Meets the requirements for roll over and rockfall prevention Advance the compensation stroke of the beam 1600㎜
Air and Water System Drill arm model Drill arm model
Air compressor 1×JN4 Drilling arm form Automatic leveling
Displacement 0.5m3/min Drill arm telescopic 1200㎜
Pressure 6-8bar Electric Hydraulic Pump Station
Drill tail lubrication device Electromagnetic pulse lubrication pump Motor 45kW 55KW 75kW
Lubrication gas consumption 0.3m3/min Impact/Propulsion/Drilling Arm Axial variable displacement piston pump
Lubrication fuel consumption 180-250g/h Rotation Gear pump
Water pump 1×CR3 Filtration Filtration 10μ
Power 1.5KW hydraulic oil tank Hydraulic oil tank 240L
Pump displacement 3m3/h Hydraulic cooler Hydraulic cooler Water cooler
Chassis Working voltage working voltage
Diesel engine

 

Cummins 59kW/ 2500rpm Frequency 50Hz
B3.9CS4 80C Start mode Star Triangle
Exhaust purification Exhaust catalytic converter Cable reel 1×F440
Drive system Four wheel drive closed walking system Cable capacity of the reel 100m 80m
Swing angle Rear axle swing ± 7 ° Cable specifications 3×35+3G10 3×50+3G10
Tire 11.00-20      
Steering mechanism ± 40 ° articulated steering      
Parking brake Multi disc wet brake      
Walking brake Dual circuit hydraulic brake      
Fuel tank 60L      

Outline Dimensions

Underground Single-boom Face Drilling Jumbo

Turning Diagram

 

Working Section

 

Underground Single-boom Face Drilling Jumbo

 

Related Products
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Technical drawing And Dimensions
Company Profile

QINGDAO ZONGDA MACHINERY CO., LTD is a professional manufacture focusing on research and development, production, sale and service of underground mining machinery, a solution supplier and a mining project contractor in China with strong comprehensive strength and rich experience in mining industry.
We have more than 30 professional and experienced mining experts and engineers and 200 staff for R&D, Production, QC, After Sales Technical Support and etc.
We have fulfilled our commitment to turn knowledge into value by delivering a comprehensive range of integrated equipment and services that cost-effectively transform ore bodies into high grade mineral products for customers.

Packaging & Shipping
FAQ
1. What mechanical products do you mainly produce? Are there any industry-specific orientations?  

A: We produce underground mining vehicles and spare parts for metal mines.

A: Yes.

A: Our quotations usually under CIF terms include Freight and Insurance but no Tariffs. 

A: 1 or 2 months usually. Yes and there are stock available sometime.

A: Our forwarder partner will arrange the proper transportation solution and can arrange the door-to-door service as well. 

A: We have special and detailed warranty policy.

A: Yes.

A: TT Bank Transfer is preferred.

A: 1 to 2 months usually. 

A: Yes, but only LC at sight.

A: We have both local and online technical after-salves service provided. 

Contact Us

Get In Touch

Depending on strong technical capability and rich experience, ZONGDA provides the EPC service to the domestic and international clients and has abundant EPC project experience in China.

Get a quote

Request a quote