Produk

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;
Detail Produk

Data Teknis

ZDFJ45/1

Underground Single-boom Face Drilling JumboUnderground Single-boom Face Drilling Jumbo

 

Features:

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

 

  • The use of screw air compressors greatly saves energy and reduces pollution, making a tangible contribution to “saving China”, improving the working environment, and protecting human health;
  • Adopting a brand new independently designed Cartesian coordinate translational drilling arm. It can achieve automatic parallelism between the advancing beam and the initial position, facilitating quick and convenient drilling positioning; The drilling arm is sturdy and reliable, with the best cross-sectional coverage shape and no blind spots within the cross-sectional range; The drilling arm can also be used for lateral opening of stone gates and drilling of anchor rods;
  • Adopting a final hole stop device and a bottom cleaning function. The drilling process automatically stops advancing and rushing in after completion, and the bottom of the hole can be controlled by a handle to blow out the residue and water without the need for manual hole cleaning, shortening the operation cycle time;
  • Adopting anti “empty hitting” technology to achieve low push and low impact, high push and high impact, no push and no impact, avoiding “empty hitting” as much as possible, and protecting rock drills and drilling tools;

 

The drilling rig is equipped with a European made medium low pressure high-frequency hydraulic rock drill. Compared with high-pressure rock drills, medium and low-pressure hydraulic rock drills have lower impact oil pressure, seals, and hydraulic hoses that do not work in high-pressure environments, greatly extending their service life, more reliable performance, and lower maintenance costs. The rock drill used with the drilling rig adopts a stepped piston, which optimizes the transmission efficiency of shock waves, improves drilling speed, reduces tool consumption, and increases equipment safety;

 

Adopting a low pollution National IV emission Cummins diesel engine, when paired with a four-wheel hydraulic drive walking system, it can achieve continuously variable transmission, strong climbing ability, and fast driving speed; Simultaneously equipped with exhaust gas purification devices, greatly improving the working conditions underground.

 

Adopting a dual circuit hydraulic service brake system, coupled with a spring brake hydraulic release parking brake system, achieves dual safety of drilling vehicle braking, greatly improving the safety of underground operations;

 

Compact in appearance and flexible in turning, it can easily pass through the narrowest 2m wide tunnel or complete right angle turns in a 3.5m wide tunnel;

 

The spacious workspace and a series of automatic functions help drivers concentrate on safe, fast, and accurate drilling. The arrangement of the drilling rig ensures that the driver has a good view, and all maintenance parts are well protected while also being easy to access and maintain.

 

Teknis Parameter

Dimensi Adan Weight Drilling System
Panjang 11570㎜ Rock drill–Montabert HC50/R38 HC95SA HC95LM/R38
Lebar 1750㎜ Impact Power 13KW 20KW 21KW
Height 2000/3000㎜ Impact Pressure 130bar 165-200bar 180bar
Berat 12750㎏ Maximum rotational pressure 150bar 210bar 210bar
Kecepatan 9±0.9㎞/h Frequency 62Hz 62Hz 62Hz
Gradabilitas 25%(14°) Torque 325Nm 597Nm 764Nm
Safety Protection  Aperture aperture 42-102mm 42-102mm
Noise level <100dB(A) Promote beam flipping 360°
Adjustable safety ceiling Meets the requirements for roll over and rockfall prevention Advance the compensation stroke of the beam 1600㎜
Air and Water Sistem Drill arm model Drill arm model
Kompresor udara 1×JN4 Drilling arm form Automatic leveling
Perpindahan 0.5m3/min Drill arm telescopic 1200㎜
Tekanan 6-8bar Listrik Hhidrolik Pump Station
Drill tail lubrication device Electromagnetic pulse lubrication pump motor 45kW 55KW 75kW
Lubrication gas consumption 0.3m3/min Impact/Propulsion/Drilling Arm Axial variable displacement piston pump
Lubrication fuel consumption 180-250g/h Rotation Gear pump
Water pump 1×CR3 Filtration Filtration 10μ
Kekuatan 1.5KW hydraulic oil tank Tangki oli hidrolik 240L
Pump displacement 3m3/h Hydraulic cooler Hydraulic cooler Water cooler
Sasis Working voltage working voltage
Diesel engine

 

Cummins 59kW/ 2500rpm Frequency 50Hz
B3.9CS4 80C Start mode Star Triangle
Exhaust purification Exhaust catalytic converter Cable reel 1×F440
Drive system Four wheel drive closed walking system Cable capacity of the reel 100m 80m
Swing angle Rear axle swing ± 7 ° Cable specifications 3×35+3G10 3×50+3G10
Ban 11.00-20      
Steering mechanism ± 40 ° articulated steering      
Rem parkir Multi disk wet brake      
Walking brake Dual circuit hydraulic brake      
Tangki bahan bakar 60L      

Outline Dimensions

Underground Single-boom Face Drilling Jumbo

Turning Diagram

 

Working Section

 

Underground Single-boom Face Drilling Jumbo

 

Produk Terkait
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Gambar Teknis Dan Dimensi
Profil Perusahaan

QINGDAO ZONGDA MACHINERY CO., LTD adalah produsen profesional yang berfokus pada penelitian dan pengembangan, produksi, penjualan dan layanan mesin pertambangan bawah tanah, pemasok solusi dan kontraktor proyek pertambangan di Cina dengan kekuatan komprehensif yang kuat dan pengalaman yang kaya dalam industri pertambangan.
Kami memiliki lebih dari 30 ahli pertambangan profesional dan berpengalaman dan insinyur dan 200 staf untuk R & amp; D, Produksi, QC, Dukungan Teknis Setelah Jual dan lain-lain.
Kami telah memenuhi komitmen kami untuk mengubah pengetahuan menjadi nilai dengan memberikan berbagai peralatan dan layanan terintegrasi yang secara hemat biaya mengubah tubuh bijih menjadi produk mineral kelas tinggi untuk pelanggan.

Kemasan & Pengiriman
FAQ (Pertanyaan umum)
1. Produk mekanis apa yang Anda produksikan terutama? Apakah ada orientasi khusus industri?  

J: Kami memproduksi kendaraan pertambangan bawah tanah dan suku cadang untuk tambang logam.

J: Ya.

A: Kutipan kami biasanya di bawah istilah CIF termasuk Pengangkutan dan Asuransi tetapi tidak ada Tarif. 

A: 1 atau 2 bulan biasanya. Ya dan ada stok yang tersedia kadang-kadang.

A: Mitra pengirim kami akan mengatur solusi transportasi yang tepat dan dapat mengatur layanan pintu ke pintu juga. 

A: Kami memiliki kebijakan garansi khusus dan rinci.

J: Ya.

A: TT Bank Transfer lebih disukai.

A: Biasanya 1 sampai 2 bulan. 

A: Ya, tetapi hanya LC di pandangan.

J: Kami memiliki layanan teknis setelah salves lokal dan online yang disediakan. 

Hubungi Kami

Hubungi kami

Tergantung pada kemampuan teknis yang kuat dan pengalaman yang kaya, ZONGDA menyediakan layanan EPC kepada klien domestik dan internasional dan memiliki pengalaman proyek EPC yang berlimpah di Cina.

Dapatkan penawaran

Minta penawaran