ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;
Ապրանքի մանրամասներ

Տեխնիկական տվյալներ

ZDFJ45/1

Underground Single-boom Face Drilling JumboUnderground Single-boom Face Drilling Jumbo

 

Features:

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

 

  • The use of screw air compressors greatly saves energy and reduces pollution, making a tangible contribution to “saving China”, improving the working environment, and protecting human health;
  • Adopting a brand new independently designed Cartesian coordinate translational drilling arm. It can achieve automatic parallelism between the advancing beam and the initial position, facilitating quick and convenient drilling positioning; The drilling arm is sturdy and reliable, with the best cross-sectional coverage shape and no blind spots within the cross-sectional range; The drilling arm can also be used for lateral opening of stone gates and drilling of anchor rods;
  • Adopting a final hole stop device and a bottom cleaning function. The drilling process automatically stops advancing and rushing in after completion, and the bottom of the hole can be controlled by a handle to blow out the residue and water without the need for manual hole cleaning, shortening the operation cycle time;
  • Adopting anti “empty hitting” technology to achieve low push and low impact, high push and high impact, no push and no impact, avoiding “empty hitting” as much as possible, and protecting rock drills and drilling tools;

 

The drilling rig is equipped with a European made medium low pressure high-frequency hydraulic rock drill. Compared with high-pressure rock drills, medium and low-pressure hydraulic rock drills have lower impact oil pressure, seals, and hydraulic hoses that do not work in high-pressure environments, greatly extending their service life, more reliable performance, and lower maintenance costs. The rock drill used with the drilling rig adopts a stepped piston, which optimizes the transmission efficiency of shock waves, improves drilling speed, reduces tool consumption, and increases equipment safety;

 

Adopting a low pollution National IV emission Cummins diesel engine, when paired with a four-wheel hydraulic drive walking system, it can achieve continuously variable transmission, strong climbing ability, and fast driving speed; Simultaneously equipped with exhaust gas purification devices, greatly improving the working conditions underground.

 

Adopting a dual circuit hydraulic service brake system, coupled with a spring brake hydraulic release parking brake system, achieves dual safety of drilling vehicle braking, greatly improving the safety of underground operations;

 

Compact in appearance and flexible in turning, it can easily pass through the narrowest 2m wide tunnel or complete right angle turns in a 3.5m wide tunnel;

 

The spacious workspace and a series of automatic functions help drivers concentrate on safe, fast, and accurate drilling. The arrangement of the drilling rig ensures that the driver has a good view, and all maintenance parts are well protected while also being easy to access and maintain.

 

Տեխնիկական Պարամետրեր

Չափսեր Aերկրորդ Weight Drilling System
Երկարություն 11570㎜ Rock drill–Montabert HC50/R38 HC95SA HC95LM/R38
Լայնությունը 1750㎜ Impact Power 13KW 20KW 21KW
Height 2000/3000㎜ Impact Pressure 130bar 165-200bar 180bar
Կաշը 12750㎏ Maximum rotational pressure 150bar 210bar 210bar
Արագություն 9±0.9㎞/h Frequency 62Hz 62Hz 62Hz
Gradeability- ը 25%(14°) Torque 325Nm 597Nm 764Nm
Safety Protection  Aperture aperture 42-102mm 42-102mm
Noise level <100dB(A) Promote beam flipping 360°
Adjustable safety ceiling Meets the requirements for roll over and rockfall prevention Advance the compensation stroke of the beam 1600㎜
Air and Water Համակարգ Drill arm model Drill arm model
Օդի կոմպրեսոր 1×JN4 Drilling arm form Automatic leveling
Տեղափոխման 0.5m3/min Drill arm telescopic 1200㎜
Ճնշում 6-8bar Էլեկտրական Hհիդրավլիկ Pump Station
Drill tail lubrication device Electromagnetic pulse lubrication pump Մոտոր 45kW 55KW 75kW
Lubrication gas consumption 0.3m3/min Impact/Propulsion/Drilling Arm Axial variable displacement piston pump
Lubrication fuel consumption 180-250g/h Rotation Gear pump
Water pump 1×CR3 Filtration Filtration 10μ
Հզորություն 1.5KW hydraulic oil tank Հիդրավլիկ յուղի բաք 240L
Pump displacement 3m3/h Hydraulic cooler Hydraulic cooler Water cooler
Շասիս Working voltage working voltage
Diesel engine

 

Cummins 59kW/ 2500rpm Frequency 50Hz
B3.9CS4 80C Start mode Star Triangle
Exhaust purification Exhaust catalytic converter Cable reel 1×F440
Drive system Four wheel drive closed walking system Cable capacity of the reel 100m 80m
Swing angle Rear axle swing ± 7 ° Cable specifications 3×35+3G10 3×50+3G10
Անվադողեր 11.00-20      
Steering mechanism ± 40 ° articulated steering      
Արգելակի կայանատեղի Multi սկավառակի խոնավ արգելակ      
Walking brake Dual circuit hydraulic brake      
Վառելիքի բաք 60L      

Outline Dimensions

Underground Single-boom Face Drilling Jumbo

Turning Diagram

 

Working Section

 

Underground Single-boom Face Drilling Jumbo

 

Հարակից ապրանքներ
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Տեխնիկական նկար եւ չափսեր
Ընկերության պրոֆիլը

QINGDAO ZONGDA MACHINERY CO., LTD- ը պրոֆեսիոնալ արտադրություն է, որը կենտրոնանում է ստորգետնյա հանքարդյունաբերական մեքենաների հետազոտության եւ զարգացման, արտադրության, վաճառքի եւ սպասարկման վրա, լուծումների մատակարար եւ հանքարդյունաբերական նախագծերի
Մենք ունենք ավելի քան 30 պրոֆեսիոնալ եւ փորձառու հանքարդյունաբերության փորձագետներ եւ ինժեներներ եւ 200 անձնակազմ R & amp; D, արտադրություն, QC, վաճառքից հետո տեխնիկական աջակցություն եւ այլն:
Մենք կատարել ենք մեր պարտավորությունը գիտելիքները արժեքի վերածելու համար ՝ տրամադրելով ինտեգրված սարքավորումների եւ ծառայությունների համապարփակ շարք, որոնք ծախսարդյունավետ կերպով փոխարկում են հանքային

Փաթեթավորում եւ առաքում
Հաճախ հարցեր
1. Ի՞նչ մեխանիկական արտադրանք եք հիմնականում արտադրում: Կան արդյունաբերության հատուկ ուղղություններ:  

Պատասխան. Մենք արտադրում ենք ստորգետնյա հանքարդյունաբերական մեքենաներ եւ մետաղական հանքավայրերի պահեստամասեր:

Պատասխան. Այո:

Պատասխան. Մեր մեջբերումները սովորաբար CIF պայմաններով ներառում են բեռնափոխադրումներ եւ ապահովագրություն, բայց ոչ մի սակագներ: 

Պատասխան. սովորաբար 1 կամ 2 ամիս: Այո, եւ երբեմն կան պաշարներ:

Պատասխան. Մեր փոխադրող գործընկերը կկազմակերպի պատշաճ տրանսպորտային լուծումը եւ կարող է նաեւ կազմակերպել դռից դռ ծառայությունը: 

Պատասխան. Մենք ունենք հատուկ եւ մանրամասն երաշխիքային քաղաքականություն:

Պատասխան. Այո:

Պատասխան. TT բանկային փոխանցումը նախընտրելի է:

Պատասխան. սովորաբար 1-2 ամիս: 

Պատասխան. Այո, բայց միայն LC-ն է տեսնում:

Պատասխան. Մենք տրամադրում ենք ինչպես տեղական, այնպես էլ առցանց տեխնիկական հետո սալվացիոն ծառայություն: 

Կապվեք մեզ հետ

Կապվեք

Կախված ուժեղ տեխնիկական կարողություններից եւ հարուստ փորձից, ZONGDA-ն ապահովում է EPC ծառայություն ներքին եւ միջազգային հաճախորդներին եւ ունի EPC նախագծի հարուստ փորձ Չինաստանում:

Ստացեք մեջբերում

Պահանջեք մեջբերում