Proizvodi

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

ZONGDA ZDFJ45-1 Underground Single-boom Face Drilling Jumbo

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;
Detalji o proizvodu

Tehnički podaci

ZDFJ45/1

Underground Single-boom Face Drilling JumboUnderground Single-boom Face Drilling Jumbo

 

Features:

  • Suitable for hard rock excavation operations with a cross-section of 12-45 square meters, it can drill vertical, horizontal, and inclined blasting holes and anchor holes;

 

  • Derivative models:
  1. Elevated type.Specially designed for large tunnels, with a maximum horizontal height of 7.4 meters and a width of 7.6 meters;
  2. Double layer guide rail type. Specially designed to accommodate anchor rod construction, the 2.2-meter anchor rod hole can be drilled in a 4meter high tunnel;
  3. Plateau type.Specially designed for construction in high-altitude areas;Adopting a brand new joint control anti jamming system to achieve linkage control such as “rotation propulsion impact”. Compared with traditional control systems that only use the retreat method to avoid sticking, the joint control anti sticking system has a better effect in preventing sticking, with fewer retreat times, making rock drilling operations more continuous and production efficiency higher. It is more suitable for rock drilling in special formations (such as caves, interlayers, etc.) and has better economic benefits;

 

  • The use of screw air compressors greatly saves energy and reduces pollution, making a tangible contribution to “saving China”, improving the working environment, and protecting human health;
  • Adopting a brand new independently designed Cartesian coordinate translational drilling arm. It can achieve automatic parallelism between the advancing beam and the initial position, facilitating quick and convenient drilling positioning; The drilling arm is sturdy and reliable, with the best cross-sectional coverage shape and no blind spots within the cross-sectional range; The drilling arm can also be used for lateral opening of stone gates and drilling of anchor rods;
  • Adopting a final hole stop device and a bottom cleaning function. The drilling process automatically stops advancing and rushing in after completion, and the bottom of the hole can be controlled by a handle to blow out the residue and water without the need for manual hole cleaning, shortening the operation cycle time;
  • Adopting anti “empty hitting” technology to achieve low push and low impact, high push and high impact, no push and no impact, avoiding “empty hitting” as much as possible, and protecting rock drills and drilling tools;

 

The drilling rig is equipped with a European made medium low pressure high-frequency hydraulic rock drill. Compared with high-pressure rock drills, medium and low-pressure hydraulic rock drills have lower impact oil pressure, seals, and hydraulic hoses that do not work in high-pressure environments, greatly extending their service life, more reliable performance, and lower maintenance costs. The rock drill used with the drilling rig adopts a stepped piston, which optimizes the transmission efficiency of shock waves, improves drilling speed, reduces tool consumption, and increases equipment safety;

 

Adopting a low pollution National IV emission Cummins diesel engine, when paired with a four-wheel hydraulic drive walking system, it can achieve continuously variable transmission, strong climbing ability, and fast driving speed; Simultaneously equipped with exhaust gas purification devices, greatly improving the working conditions underground.

 

Adopting a dual circuit hydraulic service brake system, coupled with a spring brake hydraulic release parking brake system, achieves dual safety of drilling vehicle braking, greatly improving the safety of underground operations;

 

Compact in appearance and flexible in turning, it can easily pass through the narrowest 2m wide tunnel or complete right angle turns in a 3.5m wide tunnel;

 

The spacious workspace and a series of automatic functions help drivers concentrate on safe, fast, and accurate drilling. The arrangement of the drilling rig ensures that the driver has a good view, and all maintenance parts are well protected while also being easy to access and maintain.

 

Tehnički Parametri

Dimenzije And Weight Drilling System
Dužina 11570㎜ Rock drill–Montabert HC50/R38 HC95SA HC95LM/R38
Širina 1750㎜ Impact Power 13KW 20KW 21KW
Height 2000/3000㎜ Impact Pressure 130bar 165-200bar 180bar
Težina 12750㎏ Maximum rotational pressure 150bar 210bar 210bar
Brzina 9±0.9㎞/h Frequency 62Hz 62Hz 62Hz
Gradibilnost 25%(14°) Torque 325Nm 597Nm 764Nm
Safety Protection  Aperture aperture 42-102mm 42-102mm
Noise level <100dB(A) Promote beam flipping 360°
Adjustable safety ceiling Meets the requirements for roll over and rockfall prevention Advance the compensation stroke of the beam 1600㎜
Air and Water Sistem Drill arm model Drill arm model
Kompresor vazduha 1×JN4 Drilling arm form Automatic leveling
Raspored 0.5m3/min Drill arm telescopic 1200㎜
Pritisak 6-8bar Električni Hhidraulični Pump Station
Drill tail lubrication device Electromagnetic pulse lubrication pump Motor 45kW 55KW 75kW
Lubrication gas consumption 0.3m3/min Impact/Propulsion/Drilling Arm Axial variable displacement piston pump
Lubrication fuel consumption 180-250g/h Rotation Gear pump
Water pump 1×CR3 Filtration Filtration 10μ
Moć 1.5KW hydraulic oil tank Rezervoar hidrauličnog ulja 240L
Pump displacement 3m3/h Hydraulic cooler Hydraulic cooler Water cooler
Šasija Working voltage working voltage
Diesel engine

 

Cummins 59kW/ 2500rpm Frequency 50Hz
B3.9CS4 80C Start mode Star Triangle
Exhaust purification Exhaust catalytic converter Cable reel 1×F440
Drive system Four wheel drive closed walking system Cable capacity of the reel 100m 80m
Swing angle Rear axle swing ± 7 ° Cable specifications 3×35+3G10 3×50+3G10
Gume 11.00-20      
Steering mechanism ± 40 ° articulated steering      
Parkiračka kočnica Više diskova mokra kočnica      
Walking brake Dual circuit hydraulic brake      
Rezervoar goriva 60L      

Outline Dimensions

Underground Single-boom Face Drilling Jumbo

Turning Diagram

 

Working Section

 

Underground Single-boom Face Drilling Jumbo

 

Srodni proizvodi
ZDTM41/2 Underground Bolting Boomer
ZDTM41/2 Underground Bolting Boomer
ZDTC89 Remote-control Underground Drilling Rig
ZDTC89 Remote-control Underground Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
ZDTC64 Remote-control Underground Long-hole Drilling Rig
Tehnički crtež i dimenzije
Profil kompanije

QINGDAO ZONGDA MACHINERY CO., LTD je profesionalna proizvodnja fokusirana na istraživanje i razvoj, proizvodnju, prodaju i servis podzemnih rudarskih mašina, dobavljač rješenja i izvođač rudarskih projekata u Kini sa snažnom sveobuhvatnom snagom i bogatim iskustvom u rudarskoj industriji.
Imamo više od 30 profesionalnih i iskusnih rudarskih stručnjaka i inženjera i 200 osoblja za istraživanje i razvoj. D, proizvodnja, kontrola kvaliteta, tehnička podrška nakon prodaje itd.
Ispunili smo našu posvećenost pretvaranju znanja u vrijednost pružanjem sveobuhvatne palete integrisane opreme i usluga koje troškovno efikasno pretvaraju ruda u visokokvalitetne mineralne proizvode za kupce.

Pakiranje i dostava
Često postavljana pitanja
1. Koje mehaničke proizvode uglavnom proizvodite? Postoje li orijentacije specifične za industriju?  

O: Proizvodimo podzemna rudarska vozila i rezervne dijelove za rudnike metala.

O: Da.

O: Naše ponude obično pod CIF uslovima uključuju teret i osiguranje, ali bez carina. 

O: Obično 1 ili 2 mjeseca. Da i postoje zalihe dostupne ponekad.

O: Naš partner za spediciju će organizovati odgovarajuće rešenje za transport i može organizovati uslugu od vrata do vrata. 

O: Imamo posebnu i detaljnu garancijsku politiku.

O: Da.

O: TT bankovni transfer je preferiran.

O: Obično 1 do 2 mjeseca. 

O: Da, ali samo LC na vidiku.

O: Imamo lokalnu i online tehničku uslugu nakon masaža. 

Kontaktirajte nas

Kontaktirajte nas

U zavisnosti od snažne tehničke sposobnosti i bogatog iskustva, ZONGDA pruža EPC uslugu domaćim i međunarodnim klijentima i ima bogato iskustvo u EPC projektima u Kini.

Dobijte ponudu

Tražite ponudu